A spacer is only as good as its valve
The chamber gets the attention. The valve does the work.
It is the small flexible part at the mouthpiece end, and everything a spacer is supposed to do depends on it behaving correctly at two separate moments: when the dose is fired in, and when you breathe out.
This is why a spacer is properly called a valved holding chamber. Holding is the point.
What "tidal breathing" means
Tidal breathing is just normal breathing. In and out, at rest, without trying.
It matters because it is what a spacer asks of you. Rather than one perfectly timed deep breath, you take four or five ordinary ones through the chamber. A child does not have to be taught anything, and someone mid flare-up does not have to produce a breath they cannot manage.
For that to work, the valve has to open and close with each small breath, and stay shut the rest of the time.
The two moments that matter
When the dose is fired in. The valve should be closed, so the medication is trapped in the chamber waiting for you. If it is open at that moment, part of the dose travels straight through into the mouth before the breath has even started, which is the exact problem a spacer exists to solve.
When you breathe out. The valve should close again, so your breath goes out around it rather than back through the chamber. If it does not, exhaling blows the remaining medication out of the chamber and it is gone.
A valve that fails either test gives you a spacer that looks like it is working while quietly wasting the dose.
Heart valve against butterfly valve
Not all valves are shaped the same, and the shape decides how reliably they close.
A heart valve, as used in the Able Spacer, sits closed by default. The dose is held in the chamber the moment it is fired. It opens only on the gentle pull of an inward breath, then closes again as you breathe out, so the chamber keeps what is left for the next breath.
A butterfly valve uses two flaps. The weakness is that one flap can sit open depending on how the spacer is being held, which is not something anyone thinks about while trying to medicate a child. When that happens the medication passes straight through to the mouth before the breath begins.
The same device, held at a different angle, behaves differently. That is a poor foundation for something a dose depends on.
You can see it working
On a clear spacer the valve is visible, and it moves with each breath.
That is more useful than it sounds, particularly with a young child, because it is the only way to confirm they are actually drawing from the chamber rather than just holding the mask against their face. Watch the valve, count the breaths.
If the valve is not moving, something is wrong: the mask is not sealing, the child is breathing through their nose around a gap, or the valve itself is damaged.
Looking after the valve
The valve is the part most likely to end the life of a spacer.
- Do not separate the valve from the mouthpiece when washing. The chamber comes apart, the valve stays where it is.
- Do not scrub it. It is flexible by design and scratching or stretching it changes how it sits.
- Let it air dry rather than drying it with a cloth.
- Replace the spacer if the valve is torn, stiff, sticking, or no longer moves freely.
A sticking valve is the most common reason a spacer that has been in the cupboard for three years should not be used for the next flare-up.
Frequently asked questions
How do I know my valve is working? Watch it while someone breathes through the spacer. It should move visibly with each breath in and settle closed between breaths.
The valve does not move at all. What is wrong? Usually the mask is not sealing against the face, or the person is breathing through their nose. If the seal is good and it still does not move, replace the spacer.
Can I buy a replacement valve? No. If the valve is damaged, replace the spacer.
This article is general information, not medical advice. Always follow the instructions for use supplied with your device.




